Community heat and resilience

Put recovered heat to work for your community.

Entropy Energy Network develops projects that capture heat from flexible computing equipment and deliver it to public buildings, with the responsibilities, pricing, and public review written down from the start.

A brick New England school building on a winter evening, with a white church steeple behind it.
Illustrative image of a New England public building. Not a proposed host site.

01 / What recovered heat can do

Heat that is already being made

Computing equipment turns nearly all of the electricity it uses into heat. In most facilities that heat is vented. Captured through a liquid loop and a heat exchanger, it can warm water for a building’s heating system.

  • Lower fuel use for the receiving building, at a heat price set below its avoided cost.
  • A load that can be reduced when the grid is stressed, which can help a local utility manage peaks.
  • Value that stays local, with a public record of how the project is run.

These are aims for each project, not guarantees. Results depend on the building, the utility arrangement, and the engineering review.

02 / How the model works

Four steps from equipment to building

Each project follows the same pattern, adjusted to the site. Nothing is installed until the public bodies involved have reviewed and approved it.

  1. Find a fit

    Identify a public building with a steady heating need, available electrical capacity, and a willing utility.

  2. Test feasibility

    Review the heating system, the electrical service, the tariff, siting rules, and the permits a project would need.

  3. Write it down

    Set out agreements for heat delivery, flexible service, and site use, priced at arm’s length and reviewed in public.

  4. Deliver and report

    Deliver heat into the building loop, curtail when the grid needs it, and publish status and results.

03 / Who it may suit

Communities and buildings that may fit

Not every site works. A short first conversation is usually enough to tell whether a closer look is worthwhile.

  • Schools, town buildings, and other public facilities with hydronic (hot water) heating.
  • Buildings with year-round or long-season heating demand.
  • Sites with electrical capacity nearby, or a clear path to it.
  • Communities served by a municipal light plant or a utility open to flexible-load service.
  • Local leaders willing to take a proposal through public review.
  • Projects where an independent heat price and written agreements are acceptable.

04 / Roles and responsibilities

Who does what

Each party has a defined role. Agreements between related Entropy organizations are intended to be priced at arm’s length and documented.

Equipment

Operating company

A separate operating company owns, finances, and runs the computing equipment, and carries its commercial risk.

Heat and coordination

Entropy Energy Network

Develops the project with the community, buys recovered heat at arm’s length, delivers it to the building, and keeps the public record.

Host and oversight

Community and utility

The building owner and local utility decide whether to proceed, set the service terms, and review the project through their own public process.

05 / Project directory

Projects in development

Each project keeps its own local record. One project is in development today.

A hydronic heating manifold with brass valves and insulated supply lines.
Illustrative image of a hydronic manifold. Not a photograph of project equipment.

Mansfield community heat project

A proposal to deliver recovered heat to Mansfield public buildings, working with the Town and Mansfield Municipal Electric. The project site explains how the system would work, what is established, and what is still under review.

  • LocationMansfield, Massachusetts
  • StageProposal and early development. Nothing is built or installed.
  • AgreementsNone signed with the Town or school district.

06 / Evidence and status

Where things stand

We publish what is established and what is not. Status cards are dated and updated as the work moves.

Entropy Energy Network

Updated

Organization
Organizing as a Massachusetts 501(c)(4)
Projects
One in development, in Mansfield
Installed systems
None yet
Signed heat agreements
None yet
Engineering
Feasibility review in progress
Next milestone
Complete formation and present the Mansfield proposal for public review

Documents are posted on each project site when they are filed or presented to a public body.

07 / Inquiry

Discuss a community opportunity

Tell us about the building, the community, or your question. Messages go to the Entropy Energy Network team. For Mansfield-specific questions, you can also use the Mansfield project contact page.

Prefer email? Write to een@makeentropy.com.